Clavicle Blocking Orthosis - Shoulder - Several sizes - Gibaud

Series Vest Brace - Shoulder - Multiple Sizes - Gibaud

For chest conditions that may benefit from shoulder support in retropulsion, particularly in the following cases:
• Fracture and dislocation of the clavicle
• Posture problem

General characteristics:
• Available in junior size
• Easy to put on: adjustment by sliding buckle.
• Maintains good posture

Precautions for use:
• Do not wear for prolonged periods without medical supervision
• The orthosis must not be placed in contact with damaged skin
• If any problems occur while using this orthosis, for example pain or the appearance of local symptoms, remove the vest and contact your doctor.
If any serious incident occurs in connection with the device, the healthcare professional and/or the patient must report it to the manufacturer and to the competent authority in the country concerned.

Set up :
A fitting is mandatory for adaptation and a good understanding of the fitting. The first fitting will be carried out by a healthcare professional and later by a person close to the patient according to the same protocol.
1 - Position the back plate with a loop between the shoulder blades.
2 - Unhook the two straps at the shoulder straps.
3 - Pass the straps under the arms then thread them into the triangular loop located on the back plate.
4 - Pass the straps under the arm and hook them onto the shoulder straps.
5 - Adjust the setting using the straps.

Maintenance and conservation:
• Hand wash in warm soapy water (maximum 40°C); rinse thoroughly; wring gently; do not bleach; dry flat, away from excessive heat sources (e.g. radiators), do not tumble dry; do not iron; do not dry clean.
• Dispose of the device and its packaging in accordance with local or national environmental regulations.